Seal-Guard® - Impregnator
Gold Label Penetrating Sealer For Grout, Tile & Masonry [Fast Drying]

This Penetrating Sealer for Grout, Tile and Masonry surfaces is a quick drying Impregnator in liquid form using same formulation as the award-winning aerosol. Suitable for all types of tile and masonry surfaces, including grout (damp/wet or dry), quarry tile, sandstone, terra cotta, limestone, stucco, concrete, porcelain, marble and granite. Helps protect treated surface against oil and water-based stains. For both interior and exterior use.

Installation:

Use as is. Test in obscure area to determine suitability for the intended use. Surface should be clean, dry, and free from any waxes, coatings, finishes or grouting materials. Protect any painted or stained surface adjacent to application area. Apply to surface in a thin, even coat with a pump or airless sprayer, brush, rag, mop or roller. One coat is normally sufficient, but a second application is recommended on more porous surfaces, i.e. terra cotta and sandstone, or heavy walkway areas to ensure complete protection. Allow twenty minutes between coats. Drying and curing time on a treated surface is approximately 2 l/2 hours, but for optimum results, the treated area should be kept dry and free from soils for at least 24 hours.

Note: On highly polished surfaces, such as porcelain, marble or granite, two coats are recommended. On small areas, buff off before the second coat is dry. For larger areas, let it dry and cure for 24 hours. If necessary, any excess can be easily removed with a damp cloth or buff off.

Pre-Grout Sealer / Grout Release.

Seal-Guard® can be used as a grout release prior to grouting to prevent grout stains and facilitate grout cleanup on porcelain tiles or other porous tiles.

Maintenance:

To clean treated areas, simply use water and mild detergent. There is no need to use harsh cleaning agents such as abrasive powders, ammonia, acids or bleach.

Specifications:

• Download Information PDF
• Get Adobe Reader

Un Number:	1993
Appearance:	Clear, colorless, thin liquid with a characteristic odour
Boiling Point:	56-126°C
Density (SG):	0.82 kg/litre @15c
Flash Point:	No flashpoint from 20°C to the boiling point 100 - 102°C (in the test conditions).
Percent Volatile:	100%
Solubility in Water:	Miscible
TRANSPORT:
UK Road Class :	3
UN No. Road :	1993
ADR Class No. :	3
ADR Pack Group :	II
UN No. Air :	1993
UN Road Pack GR. :	II
ADR Class – Class 3 :	Flammable Liquids
UN No. Sea :	1993
QUANTITIES:
Supplied in 1 litre containers (6 x 1 litres to a carton) and in 5 litre containers (4 x 5 litres to a carton).

GUARANTEE :

If not completely satisfied with product performance when used as directed, contact DYCON LTD for product replacement or refund of purchase price upon return of unused portion. Replacement cost for labour and installation materials, such as tile, are excluded. Any variance from the terms, misuse or misapplication of the product shall void and nullify this guarantee.